井蓋模具的特點是生產出的井蓋尺寸標準,適用于小區內,道路內等地方使用,模具不受尺寸外形限制,可生產各種尺寸井蓋,可加重加強定做各種尺寸,選擇合適的井蓋,以免發生不必要的為危險。
The feature of the manhole cover mould is that the size standard of the manhole cover is produced, which is suitable for the use in the community, road and other places. The mold is not limited by the size and shape, and can produce various sizes of manhole cover. It can strengthen the customization of various sizes and select the appropriate well cover to avoid unnecessary danger.
井蓋模具設計結構與方式是按照對井蓋預制件的構造而言,一般塑料井蓋模具采用的都是分體模式,因為內模不好拆,所以內模分塊數是按照3塊進行,而外模則2塊就可以了。
The design structure and method of manhole cover mold is based on the structure of prefabricated parts of well cover. Generally, the mold of plastic well cover adopts the split mode. Because the internal mold is difficult to disassemble, the number of internal mold blocks is 3, while the external mold is 2.
按照內的結構進行模具生產,一般井蓋的體積比較大,所以井蓋模具的設置為平模的形式,在預制的過程中采用吊裝形式進行脫模,模板的四周可以全部打開。
According to the internal structure of the mold production, generally the volume of the well cover is relatively large, so the well cover mold is set in the form of flat mold. In the process of prefabrication, the lifting form is used for demoulding, and all sides of the template can be opened.
通過正常的施工途徑,采用標準的生產模式,將井蓋模具的各個結構進行細致的劃分,承受壓力比較重的地方要加固筋板,而比較輕的地方,筋板密度小一些就行了,這樣的配比有利于模板的綜合,節省生產成本,保證井蓋模具的使用效率。
Through the normal construction way, using the standard production mode, the various structures of the plastic well cover mold are carefully divided. The rib plate should be reinforced where the pressure is relatively heavy, and the rib plate density is less in the light place. This ratio is conducive to the synthesis of the formwork, saving the production cost and ensuring the use efficiency of the well cover mold.